Marktprognose für Kunststoffe für den SLS-3D-Druck im asiatisch-pazifischen Raum bis 2030 – Regionale Analyse – nach Typ (Polyamid, Thermoplastisches Polyurethan (TPU), Polyetheretherketon (PEEK) und andere) und Endverbrauchsbranche (Gesundheitswesen, Luft- und Raumfahrt und Verteidigung, Automobil, Elektronik, andere)

BMIRE00030069 | Pages: 104 | Chemicals and Materials | May 2024 | Type: Regional | Status: Published
Der Markt für Kunststoffe für SLS-3D-Druck im asiatisch-pazifischen Raum wurde im Jahr 2022 auf 26,74 Millionen US-Dollar geschätzt und soll bis 2030 118,13 Millionen US-Dollar erreichen; von 2022 bis 2030 wird eine durchschnittliche jährliche Wachstumsrate von 20,4 % erwartet.

Steigende Nachfrage nach SLS-3D-Druck aus der Gesundheitsbranche beflügelt den Markt für Kunststoffe für SLS-3D-Druck im asiatisch-pazifischen Raum

Im Gesundheitswesen steigt die Produktion patientenspezifischer Implantate und Prothesen. In der Orthopädie beispielsweise wird SLS zur Herstellung individueller Hüft- und Knieimplantate verwendet, die auf die einzigartige Anatomie eines Patienten zugeschnitten sind. Solche Implantate verbessern den Komfort und verringern das Risiko von Komplikationen, was zu besseren Patientenergebnissen führt. Im zahnmedizinischen Bereich ist SLS-3D-Druck für die Herstellung hochpräziser Modelle, Kronen, Brücken und Zahnprothesen unverzichtbar geworden. So setzen beispielsweise Dentallabore die SLS-Technologie ein, um der wachsenden Nachfrage nach präzisem Zahnersatz gerecht zu werden und Patienten besser passende und haltbarere Lösungen anzubieten. Darüber hinaus wird SLS für die Operationsplanung und -ausbildung eingesetzt. Krankenhäuser und medizinische Einrichtungen verwenden SLS-gedruckte anatomische Modelle, um komplexe Operationen zu simulieren und zu üben. Chirurgen können ihre Techniken verfeinern und so die Risiken während tatsächlicher Eingriffe minimieren. Dies ist besonders wichtig für komplizierte Operationen wie Neurochirurgie oder kraniofaziale Rekonstruktionen geworden. Darüber hinaus wird die SLS-Technologie häufig im Bereich der Pharmazie eingesetzt, wozu auch die zunehmende Verwendung von SLS zur Entwicklung personalisierter Arzneimittelverabreichungssysteme gehört, die patientenspezifische Medikamente mit präzisen Dosierungen ermöglichen. Dies hat das Potenzial, die Wirksamkeit von Medikamenten und die Patientenversorgung zu revolutionieren. Im Prothetiksektor tragen SLS-gedruckte Komponenten zu verbesserter Funktionalität und Komfort für Amputierte bei. Prothesen werden leichter und anpassbarer und bieten Menschen, die diese Geräte benötigen, eine bessere Lebensqualität. Daher dürfte die zunehmende Nutzung durch den Gesundheitssektor im Prognosezeitraum mehrere Chancen für den globalen Markt für Kunststoffe für den SLS-3D-Druck bieten.

Marktübersicht für Kunststoffe für den SLS-3D-Druck im asiatisch-pazifischen Raum

Im asiatisch-pazifischen Raum sind einige der weltweit größten Fertigungswirtschaften angesiedelt, darunter China, Japan und Südkorea. Diese Länder investieren stark in fortschrittliche Fertigungstechnologien wie den SLS-3D-Druck. In der Region gibt es auch Unternehmen für additive Fertigung und SLS-3D-Druck. Im Jahr 2021 stellte Sindoh, der in Südkorea ansässige Spezialist für 2D- und 3D-Drucker, den Sindoh S100 vor, einen industriellen Polymer-3D-Drucker auf Basis der SLS-Technologie. Sindoh S100 ist ein 3D-Drucker mit Bluesint PA12-Technologie für 3D-Druck mit bis zu 100 % recyceltem Pulver. Darüber hinaus steigern der schnell wachsende Fertigungssektor und die zunehmende Anwendung in den Endverbrauchsbranchen die Nachfrage nach SLS-3D-Druck. Der SLS-3D-Druck wird zur Herstellung leichter und langlebiger Komponenten für Flugzeuge und Raumfahrzeuge verwendet. SLS-3D-Druck wird auch zur Herstellung von Prototypen und Funktionskomponenten für Fahrzeuge verwendet. In der Region Asien-Pazifik sind große Automobilunternehmen ansässig, darunter Toyota Motor Corporation, Tata Motors Ltd, Hyundai Motor Company, Nissan Motor Co Ltd und Honda Motor Co Ltd. Laut einem Bericht der China Passenger Car Association lieferte Tesla Inc. im Jahr 2022 83.135 in China hergestellte Elektrofahrzeuge aus, was auf ein Wachstum der Elektrofahrzeugverkäufe ab 2021 hindeutet. Laut dem Bericht der Internationalen Organisation der Kraftfahrzeughersteller wurde die Kraftfahrzeugproduktion in der Region Asien-Pazifik im Jahr 2021 auf ~46,73 Millionen Einheiten geschätzt. Darüber hinaus stieg die Pkw-Produktion in der Region von 35,82 Millionen im Jahr 2020 auf 38,15 Millionen im Jahr 2021. Daher wird erwartet, dass die Präsenz großer SLS-3D-Druckunternehmen und die sich entwickelnde Automobilindustrie in der Region das Wachstum des Marktes für Kunststoffe für den SLS-Druck im Prognosezeitraum ankurbeln werden.

Umsatz und Prognose für den asiatisch-pazifischen Markt für Kunststoffe für SLS-3D-Druck bis 2030 (Mio. USD)

Segmentierung des asiatisch-pazifischen Marktes für Kunststoffe für SLS-3D-Druck

Der asiatisch-pazifische Markt für Kunststoffe für SLS-3D-Druck ist nach Typ, Endverbrauchsbranche und Land segmentiert.

Basierend auf dem Typ ist der asiatisch-pazifische Markt für Kunststoffe für SLS-3D-Druck in Polyamid, thermoplastisches Polyurethan (TPU), Polyetheretherketon (PEEK) und andere unterteilt. Das Polyamidsegment hatte 2022 den größten Marktanteil an Kunststoffen für SLS-3D-Druck im asiatisch-pazifischen Raum.

In Bezug auf die Endverbrauchsbranche ist der asiatisch-pazifische Markt für Kunststoffe für SLS-3D-Druck in die Bereiche Gesundheitswesen, Luft- und Raumfahrt und Verteidigung, Automobil, Elektronik und andere segmentiert. Das Elektroniksegment hatte 2022 den größten Marktanteil an Kunststoffen für den SLS-3D-Druck im asiatisch-pazifischen Raum.

Nach Ländern ist der Markt für Kunststoffe für den SLS-3D-Druck im asiatisch-pazifischen Raum in Australien, China, Indien, Japan, Südkorea und den Rest des asiatisch-pazifischen Raums unterteilt. China dominierte 2022 den Markt für Kunststoffe für den SLS-3D-Druck im asiatisch-pazifischen Raum.

3D Systems Corp, BASF SE, Evonik Industries AG, Arkema SA, Ensinger GmbH, Stratasys Ltd und EOS GmbH sind einige der führenden Unternehmen auf dem Markt für Kunststoffe für den SLS-3D-Druck im asiatisch-pazifischen Raum.

Table of Content

 

1. Introduction

1.1 The Insight Partners Research Report Guidance

1.2 Market Segmentation

2. Executive Summary

2.1 Key Insights

2.2 Market Attractiveness

3. Research Methodology

3.1 Coverage

3.2 Secondary Research

3.3 Primary Research

4. Asia Pacific Plastics for SLS 3D Printing Market Landscape

4.1 Overview

4.2 Porter's Five Forces Analysis

4.2.1 Bargaining Power of Buyers

4.2.2 Bargaining Power of Suppliers

4.2.3 Threat of New Entrants

4.2.4 Threat of Substitutes

4.2.5 Intensity of Competitive Rivalry

4.3 Ecosystem Analysis

4.3.1 Raw Material Suppliers:

4.3.2 Manufacturers:

4.3.3 Distributors/Suppliers:

4.3.4 End Users:

5. Asia Pacific Plastics for SLS 3D Printing Market - Key Market Dynamics

5.1 Market Drivers

5.1.1 Advancements in SLS-Compatible Plastic Materials

5.1.2 Growing Demand for Lightweight and Durable Parts in Various Industries

5.2 Market Restraints

5.2.1 High Cost of SLS-Compatible Plastics

5.3 Market Opportunity

5.3.1 Increasing Demand for SLS 3D Printing from the Healthcare Industry

5.4 Future Trend

5.4.1 Adoption of Recyclable Materials for SLS 3D Printing

5.5 Impact Analysis

6. Plastics for SLS 3D Printing Market - Asia Pacific Market Analysis

6.1 Asia Pacific Plastics for SLS 3D Printing Market Revenue (US$ Million)

6.2 Asia Pacific Plastics for SLS 3D Printing Market Volume (Tons)

6.3 Asia Pacific Plastics for SLS 3D Printing Market Forecast and Analysis

7. Asia Pacific Plastics for SLS 3D Printing Market Analysis - Type

7.1 Polyamide

7.1.1 Overview

7.1.2 Polyamide: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

7.1.3 Polyamide: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecast to 2030 (Tons)

7.1.3.1 PA11

7.1.3.1.1 PA11: Asia Pacific Plastics for SLS 3D Printing Market - Revenue and Forecast to 2030 (US$ Million)

7.1.3.1.2 PA11: Asia Pacific Plastics for SLS 3D Printing Market - Volume and Forecast to 2030 (Tons)

7.1.3.2 PA12

7.1.3.2.1 PA12: Asia Pacific Plastics for SLS 3D Printing Market - Revenue and Forecast to 2030 (US$ Million)

7.1.3.2.2 PA12: Asia Pacific Plastics for SLS 3D Printing Market - Volume and Forecast to 2030 (Tons)

7.2 Thermoplastic Polyurethane

7.2.1 Overview

7.2.2 Thermoplastic Polyurethane: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

7.2.3 Thermoplastic Polyurethane: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecast to 2030 (Tons)

7.3 Polyether Ether Ketone

7.3.1 Overview

7.3.2 Polyether Ether Ketone: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

7.3.3 Polyether Ether Ketone: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecast to 2030 (Tons)

7.4 Others

7.4.1 Overview

7.4.2 Others: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

7.4.3 Others: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecast to 2030 (Tons)

8. Asia Pacific Plastics for SLS 3D Printing Market Analysis - End-Use Industry

8.1 Healthcare

8.1.1 Overview

8.1.2 Healthcare: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

8.2 Aerospace and Defense

8.2.1 Overview

8.2.2 Aerospace and Defense : Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

8.3 Automotive

8.3.1 Overview

8.3.2 Automotive: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

8.4 Electronics

8.4.1 Overview

8.4.2 Electronics: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

8.5 Others

8.5.1 Overview

8.5.2 Others: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecast to 2030 (US$ Million)

9. Asia Pacific Plastics for SLS 3D Printing Market - Country Analysis

9.1 Asia Pacific Plastics for SLS 3D Printing Market

9.1.1 Asia Pacific Plastics for SLS 3D Printing Market Breakdown by Country

9.1.1.1 Asia Pacific Plastics for SLS 3D Printing Market Breakdown by Country

9.1.1.2 Australia Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.3 Australia Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.3.1 Australia Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.3.2 Australia Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

9.1.1.4 China Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.5 China Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.5.1 China Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.5.2 China Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

9.1.1.6 India Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.7 India Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.7.1 India Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.7.2 India Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

9.1.1.8 Japan Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.9 Japan Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.9.1 Japan Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.9.2 Japan Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

9.1.1.10 South Korea Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.11 South Korea Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.11.1 South Korea Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.11.2 South Korea Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

9.1.1.12 Rest of Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

9.1.1.13 Rest of Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

9.1.1.13.1 Rest of Asia Pacific Plastics for SLS 3D Printing Market Breakdown by Type

9.1.1.13.2 Rest of Asia Pacific Plastics for SLS 3D Printing Market Breakdown by End-Use Industry

10. Industry Landscape

10.1 Overview

10.2 Merger and Acquisition

10.3 Other Business Strategies

11. Company Profiles

11.1 3D Systems Corp

11.1.1 Key Facts

11.1.2 Business Description

11.1.3 Products and Services

11.1.4 Financial Overview

11.1.5 SWOT Analysis

11.1.6 Key Developments

11.2 BASF SE

11.2.1 Key Facts

11.2.2 Business Description

11.2.3 Products and Services

11.2.4 Financial Overview

11.2.5 SWOT Analysis

11.2.6 Key Developments

11.3 Evonik Industries AG

11.3.1 Key Facts

11.3.2 Business Description

11.3.3 Products and Services

11.3.4 Financial Overview

11.3.5 SWOT Analysis

11.3.6 Key Developments

11.4 Arkema SA

11.4.1 Key Facts

11.4.2 Business Description

11.4.3 Products and Services

11.4.4 Financial Overview

11.4.5 SWOT Analysis

11.4.6 Key Developments

11.5 Ensinger GmbH

11.5.1 Key Facts

11.5.2 Business Description

11.5.3 Products and Services

11.5.4 Financial Overview

11.5.5 SWOT Analysis

11.5.6 Key Developments

11.6 Stratasys Ltd

11.6.1 Key Facts

11.6.2 Business Description

11.6.3 Products and Services

11.6.4 Financial Overview

11.6.5 SWOT Analysis

11.6.6 Key Developments

11.7 EOS GmbH

11.7.1 Key Facts

11.7.2 Business Description

11.7.3 Products and Services

11.7.4 Financial Overview

11.7.5 SWOT Analysis

11.7.6 Key Developments

12. Appendix

 

 

 

List of Tables

Table 1. Asia Pacific Plastics for SLS 3D Printing Market Segmentation

Table 2. Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Table 3. Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Table 4. Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - Type

Table 5. Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - Type

Table 6. Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - End-Use Industry

Table 7. Australia Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 8. Australia Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 9. Australia Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

Table 10. China Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 11. China Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 12. China Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

Table 13. India Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 14. India Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 15. India Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

Table 16. Japan Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 17. Japan Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 18. Japan Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

Table 19. South Korea Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 20. South Korea Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 21. South Korea Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

Table 22. Rest of Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By Type

Table 23. Rest of Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons) - By Type

Table 24. Rest of Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million) - By End-Use Industry

 

 

List of Figures

Figure 1. Asia Pacific Plastics for SLS 3D Printing Market Segmentation, By Country

Figure 2. Porter's Five Forces Analysis

Figure 3. Ecosystem: Asia Pacific Plastic for SLS 3D Printing Market

Figure 4. Market Dynamics: Asia Pacific Plastic for SLS 3D Printing Market

Figure 5. Asia Pacific Plastic for SLS 3D Printing Market Impact Analysis of Drivers and Restraints

Figure 6. Asia Pacific Plastics for SLS 3D Printing Market Revenue (US$ Million), 2020 - 2030

Figure 7. Asia Pacific Plastics for SLS 3D Printing Market Volume (Tons), 2020 - 2030

Figure 8. Asia Pacific Plastics for SLS 3D Printing Market Share (%) - Type, 2022 and 2030

Figure 9. Polyamide: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 10. Polyamide: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 11. PA11: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 12. PA11: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 13. PA12: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 14. PA12: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 15. Thermoplastic Polyurethane: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 16. Thermoplastic Polyurethane: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 17. Polyether Ether Ketone: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 18. Polyether Ether Ketone: Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 19. Others: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 20. Others : Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 21. Asia Pacific Plastics for SLS 3D Printing Market Share (%) - End-Use Industry, 2022 and 2030

Figure 22. Healthcare: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 23. Aerospace and Defense: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 24. Automotive: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 25. Electronics: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 26. Others: Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 27. Asia Pacific Plastics for SLS 3D Printing Market Revenue, By Key Countries, (2022)(US$ Mn)

Figure 28. Asia Pacific Plastics for SLS 3D Printing Market Breakdown By Key Countries, 2022 and 2030 (%)

Figure 29. Australia Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 30. Australia Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 31. China Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 32. China Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 33. India Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 34. India Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 35. Japan Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 36. Japan Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 37. South Korea Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 38. South Korea Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

Figure 39. Rest of Asia Pacific Plastics for SLS 3D Printing Market Revenue and Forecasts to 2030 (US$ Million)

Figure 40. Rest of Asia Pacific Plastics for SLS 3D Printing Market Volume and Forecasts to 2030 (Tons)

 

1. 3D Systems Corp

 

2. Arkema SA

3. BASF SE

4. Ensinger GmbH

5. EOS GmbH

6. Evonik Industries AG

7. Stratasys Ltd

 

  • Save and reduce time carrying out entry-level research by identifying the growth, size, leading players, and segments in the Asia Pacific plastics for SLS 3D printing market.
  • Highlights key business priorities in order to assist companies to realign their business strategies.
  • The key findings and recommendations highlight crucial progressive industry trends in Asia Pacific plastics for SLS 3D printing market., thereby allowing players across the value chain to develop effective long-term strategies.
  • Develop/modify business expansion plans by using substantial growth offering developed and emerging markets.
  • Scrutinize in-depth Asia Pacific plastics for SLS 3D printing market trends and outlook coupled with the factors driving the market, as well as those hindering it.
  • Enhance the decision-making process by understanding the strategies that underpin security interest with respect to client products, segmentation, pricing, and distribution.
Report Code
Full Name
Country Name
Email Id
Phone Number
Job Title
Company
Requirement

Note : Your data will never be shared with third parties, however, we may send you information from time to time about our products that may be of interest to you. By submitting your details, you agree to be contacted by us. You may contact us at any time to opt-out.


Purchase Options
Single User License
$3550
$2840
Site License
$4550
$3640
Enterprise License
$5550
$4440